Eclipse Outdoor 40 (non-illuminated)
Eclipse Outdoor 40 is a robust and storm proof display frame for exterior use.
The printed banner does not require any eyelets or tensioning spring. Instead, it is tensioned through a clever, internal tilt profile.
The overall frame is 40mm deep and is not illuminated. It requires a non-stretch PVC/fabric with a 14mm x 3mm PVC / Silicon edging strip around its perimeter.
Eclipse Outdoor 40 is delivered to the size requested with mitred corners that are ready to assemble. Maximum size is 18 metres x 5 metres.
Please refer to the guides below for information on how to print the banner and install the unit.
Lumina Outdoor 80 (illuminated)
Lumina Outdoor 80 is a backlit display frame. An illuminated, robust and storm proof display frame for exterior use.
The display is backlit with an IP67 (water ingress protection) LED system
The printed banner does not require any eyelets or tensioning spring. Instead, it is tensioned through a clever, internal tilt profile.
The overall frame is 80mm deep. It requires a non-stretch PVC/fabric with a 14mm x 3mm PVC / Silicon edging strip around its perimeter.
Eclipse Outdoor 80 is delivered, built to the size requested with the LED backboard fitted (in sections for larger units). Maximum size is 12 metres x 3 metres.
Please refer to the guides below for information on how to print the banner and install the unit.
Video of tensioning Mechanism
Both of the Lumina OUTDOOR solutions above (lit and non-lit) have the same, unique ‘tensioning mechanism.
Small grub screws in the frame side, open and close the recess part of the frame that accepts the silicon edge of the display print.
Release the mechanism to reveal the recess, push fit your print and then retighten. The recess moves back under the frame to tension the print and also prevent its removal by anyone, including the elements.
